The hydrothermal preheater is suitable for all types of inert, oxidizing and combustible (ADPE) gases in the various versions. It consists of electrical equipments (electrical resistance and electric thermostat) connected together in a typical configuration and individually accompanied by CE marking.
Conseguently regarding the compliance of the preheater at Dir. 73/23/CEE and 89/336/CE is guaranteed by the CE mark affixed by the manufacturers of individual components.
Electrical resistence and thermostat corresponds to the following standards: CEI EN 60204-1.
Benefits
The preheater guarantees a constant temperature during decompression of gas, keeping the equipment always in perfect efficienty id the formation of ice that could damage the decompression device, avoiding production downtime.
Applications
On all system and centralization
parts
Electrical resistence 1500 W 220 V - 50 Hz
Maintenance
You must test the functioning and maintenance of these devices at least once a year.
Technical data
Maximum inlet pressure 200 bar
Container material Stainless steel AISI304
Serpentine material Copper
Inlet fittingsmaterial Brass OT58
Fittings Double ogive at perfect held
Applicability | For compressed gas Mix Ar–O2 | Liquefied Gas (cylinder) CO2, N2O |
Exercixe pressure |
200 bar |
60 bar |
Maximum flow |
50 Nm3/h |
50 Nm3/h |
Electrical characteristic: Power - Tension - Temperature |
1500 W 220 V – 50/60 Hz 0° - 70° (Autom.) |
1500 W 220 V – 50/60 Hz 0° - 70° (Autom.) |
Standard attack |
21,7 W Male |
21,7 W Male |
Outlet standard attack |
21,7 W Male |
21,7 W Male |
Control unit and pressure reduction for integration of industrial machines to oxyfuel.
Applications
Industrial sector for cutting sheet metal and profiles
Maintenance
Requires no special maintenance: only the control of pressure regulators, flame failure valves and solenoid valves.
Accessories
A request flexible rubber hoses to connect to the main machine.
Option: unit achievable in case with or without compartment for electrical components.
Parts
Complete set of pressure reducers
Stop flame valve
Solenoid valve kit (coil and diaphragm)
Filter cartridge
Technical data
Maximum inlet pressure 35 bar
Maximum outlet pressure 15 bar for Oxygen – 8 bar for Gas
Construction material Brass and copper
Inlet 3/8" x 3/8"
Outlet 3/8" x ¼"
Weight 20 Kg.
Operating temperature -10°C +50°C
For several years the production of gaseous mixtures pre - formed has found applications becoming more common in industrial production departments. The mixture of gases produced artificially offers the possibility to vary the percentages of gas as a function of the production requirements. Our mixing system is able to produce an adequate mixture directly at the final user, by taking primary gases from their respective containers and mixing in the desired proportions; concentrations of primary gases, also, can be changed with simple operations. The mixing device is the result of a study aimed at creating a reliable product, easy to use and maintenance. The system was developed with the main purpose to provide an efficient, practical and economical for the production of mixtures, in short these are the main characteristics of the mixer.
Description
Mixers for 2 or 3 gas with flow rates from 0 to 200 Nm3/h
Flowmeter glass with direct reading scale
These mixers work in conjunction with a system of pneumonia and to a tank (vol. 100 - 300 lt.), which covers high requirements and allows the extraction of the smaller amount of gas, while keeping constant the precision of the mixture
On request they can be supplied with pneumatic locking device for lack of gas
Annexes documents
Test certificate
Declaration of conformity
Flow diagram and construction drawing
Elements list
Maintenance and use manual
Data sheet of main components
Technical data
All gas (no toxic and corrosive gas)
Field mixing 0 – 100 %
Inlet gas pressure Max 20 bar
Outlet mixture pressure Adjustable 2 – 8 bar
Precision mixture ± 3 %
Temperature range -10°C +50°C
Containment structure Stainless steel or Carbon Steel
For several years the production of gaseous mixtures pre - formed has found applications becoming more common in industrial production departments. The mixture of gases produced artificially offers the possibility to vary the percentages of gas as a function of the production requirements. Our mixing system is able to produce an adequate mixture directly at the final user, by taking primary gases from their respective containers and mixing in the desired proportions; concentrations of primary gases, also, can be changed with simple operations. The mixing device is the result of a study aimed at creating a reliable product, easy to use and maintenance. The system was developed with the main purpose to provide an efficient, practical and economical for the production of mixtures, in short these are the main characteristics of the mixer.
Description
Mixers for 2 or 3 gas with flow rates from 0 to 300 Nlt/min
Flowmeter glass with direct reading scale
These mixers work in conjunction with a system of pneumonia and to a tank (vol. 25 - 50 - 100 lt.), which covers high requirements and allows the extraction of the smaller amount of gas, while keeping constant the precision of the mixture
On request they can be supplied with pneumatic locking device for lack of gas
Annexes documents
Test certificate
Declaration of conformity
Flow diagram and construction drawing
Elements list
Maintenance and use manual
Data sheet of main components
Technical data
All gas (no toxic and corrosive gas)
Field mixing 0 – 100 %
Inlet gas pressure Max 20 bar
Outlet mixture pressure Adjustable 2 – 8 bar
Precision mixture ± 3 %
Temperature range -10°C +50°C
Containment structure Stainless steel
Dimension shown mm c.a. 250 (l) x 300 (p) x 300 (h)
The SCALDA preheater is suitable for inert gases and O2 / N2O, it consists of electrical equipments (electrical resistance and electric thermostat) connected together in a typical configuration and individually accompanied by CE marking. Conseguently regarding the compliance of the preheater at Dir. 73/23/CEE and 89/336/CE is guaranteed by the CE mark affixed by the manufacturers of individual components. Electrical resistence and thermostat corresponds to the following standards: CEI EN 60204-1.
Benefits
The preheater guarantees a constant temperature during decompression of gas, keeping the equipment always in perfect efficiency to avoid the formation of ice that could damage the decompression device, avoiding production downtime.
Applications
Out of the cylinder or out of the decompression ramp on exchange panel for heating of CO2 / N2O and inert gas
Maintenance
You must test the functioning and maintenance of these devices at least once a year
Parts
Electrical resistence 350 W 220 V - 50 Hz
Technical data
Maximum inlet pressure 220 bar / 80 bar
Body material Brass OT58
Cap material Inox AISI304 – Stainless steel AISI304
Inlet fittings material Brass OT58
Fittings Double ogive at perfect held